Product filter
Products Coloring Liquid
产品价格: Apply Vita 3D shades system Special:TO Incisal Liquid Coloring Liquid: 0M1 0M2 0M3 1M1 1M2 2M1 2M2 2M3 2L1.5 2L2.5 2R1.5 2R2.5 3M1 3M2 3M3 3L1.5 3L2.5 3R1.5 3R2.5 4M1 4M2 4M3 4L1.5 4L2.5 4R1.5 4R2.5 5M1 5M2 5M3 Dyeing methods: Before dyeing , clean the zirconia teeth should be cleaned with a brush and blown up with an air gun(or clean with clean water or ultrasonic wave, dyeing must be done after drying )。 Coping dyeing Dipping: 1、Choose proper container at demands and pour in coloring liquid;      Note: shake the coloring liquid evenly;2、Put the zirconia teeth into coloring liquid with a plastic tweezer ,dipping for 2 mins;  Note: Make sure the whole teeth in the coloring liquid , do not separately dip different part of the teeth;3、After dipping ,take the teeth out with a tweezer and clean the liquid on it with tissue(do not put the teeth on water-absorbing objects for a very long time;  Note:Container, tweezer,tissue and other tools should be cleaned before operation;4、Dry the zirconia teeth with a constant temperature box(100° for 20mins)or infrared light (30mins in a distance of 10cm)  Note:Drying time for coping could be lessened propriately,while the dying time for crown ,bridge and bridge with missing teethcould be increased correspondingly.Crown dyeing Incisal brushing+ dipping: 1、Brush the incisal part(or cusp, edge ) of zirconia teeth two times evenly with incisal liquid using an op pen ;   Note:When brushing the incisal part, pls avoid imbuing to other parts;2、Dipping(same as the copping dyeing and dipping)Precautions: Storage temprature:0~10°; Pls pay attention to the labels to avoid mixing up and failure in dying ;This coloring liquid are specialized for XTCERA zirconia blanks, do not utilize for other blanks or mix with other coloring liquid;Pls operate as recommended to get the best dyeing result.
产品价格: X-COLOR dyeing liquids are independent developed and researched for zirconium full contour by XTCERA,containing A,B,C,D 16 shading serious and other special colors,which performs better matched with full contour from zirconia blocks produced by Coloring Liquid:Shade A :A1 A2 A3 A3.5 A4Shade B :B1 B2 B3 B4Shade C :C1 C2 C3 C4Shade D :D2 D3 D4T0 Incisal LiquidSpecial Shade:P1 P2 P3 O1 O2 G1 G2Charateristics:1、Rich in color ,good dyeing effect:16 basic colors and special shades could meet customers'genuine and aesthetic requirements to the greatest extent;2.Excellent penetration power and shorter dyeing time:could fast penetrate to the intra teeth and easy to dye;3.Easy to operate and stable in functions:easy and practicle dyeing methods greatly reduces the operational requirements for technicians,excellent dyeing stabilityand repeatiblity;4.Small effect on material property:test indicates the hardness and intensity changes little after dyeing.5.Meet the requirements of integrity,use XTCERA zirconia blanks , dyeing effect could be better. Dyeing methods:Before dyeing , clean the zirconia teeth should be cleaned with a brush and blown up with an air gun(or clean with clean water or ultrasonic wave, dyeing must be done after drying )。Coping dyeingDipping:1、Choose proper container at demands and pour in coloring liquid;     Note: shake the coloring liquid evenly;2、Put the zirconia teeth into coloring liquid with a plastic tweezer ,dipping for 2 mins;  Note: Make sure the whole teeth in the coloring liquid , do not separately dip different part of the teeth;3、After dipping ,take the teeth out with a tweezer and clean the liquid on it with tissue(do not put the teeth on water-absorbing objects for a very long time;  Note:Container, tweezer,tissue and other tools should be cleaned before operation;4、Dry the zirconia teeth with a constant temperature box(100° for 20mins)or infrared light (30mins in a distance of 10cm)  Note:Drying time for coping could be lessened propriately,while the dying time for crown ,bridge and bridge with missing teethcould be increased correspondingly.Crown dyeingIncisal brushing+ dipping:1、Brush the incisal part(or cusp, edge ) of zirconia teeth two times evenly with incisal liquid using an op pen ;   Note:When brushing the incisal part, pls avoid imbuing to other parts;2、Dipping(same as the copping dyeing and dipping)Precautions:Storage temprature:0~10°; Pls pay attention to the labels to avoid mixing up and failure in dying ;This coloring liquid are specialized for XTCERA zirconia blanks, do not utilize for other blanks or mix with other coloring liquid;Pls operate as recommended to get the best dyeing result.
产品名称: X-COLOR Visible System
产品价格: X-color visible system is a revolution of the original dipping method.
Copyright ©2012 - 2018 XTCERA
犀牛云提供企业云服务
地址:中国·深圳·宝安中心区·宝源路F518时尚创意园15栋3层
8600TEL: 86 0755-8600 1804
FAX: 86 0755-8600 1486
邮编:330520